Table of Contents
Advertisement
Upgrading Interface Adapter Firmware
CAUTION: If a local port user has access to a specific Interface Adapter, a remote
user can obstruct the local port user's access by performing an Interface Adapter
firmware upgrade.
To upgrade Interface Adapter firmware simultaneously:
1. Press the Print Scrn key. The Main dialog box is displayed.
2. Click Commands. The Commands dialog box is displayed.
3. Click IA Status. The IA Status dialog box is displayed.
Figure 7-9: IA Status dialog box
HP IP Console Switch User Guide
Upgrading Firmware using TFTP
7-19
Advertisement
Table of Contents
