Upgrading Firmware using TFTP
Configuring TFTP for Windows
To configure TFTP for Windows operating systems:
1. Access the Secure TFTP Service page.
Windows NT 4.0
a. From the Start menu, select Settings, Control Panel.
b. Double-click Network.
c. Click Services.
d. From the Network Services list, select Secure TFTP Service and click
Properties. The Secure TFTP Service window is displayed.
Windows 2000 or Windows XP
a. From the Start menu, select Run.
b. At the prompt, enter
Secure TFTP Service window is displayed.
Figure 7-1: Secure TFTP Service window
7-4
in the Open: field, then click OK. The
eqmtftpc
HP IP Console Switch User Guide