Table of Contents
Advertisement
Stop auto panning and change
While operating
the observe position to the
Auto Pan func-
alarmed position then keep
tion.
observe the alarmed position.
Stop operating pattern function
and change the observe posi-
While operating
tion to the alarmed position then
Pattern function.
keep observe the alarmed posi-
tion.
•
Auto mode: Change the observe position to a
sensor that senses a touch or shock then return
to the position that previously observed. (Set the
Duration Time of Alarm Input function to "1 to
255".)
<Example : If this unit receives signal from "Alarm 4">
Before inputting
the alarm signal
Alarm signal
input
Released
Preset 1
alarm signal
Alarm 1
Preset 2
Alarm 2
Function status
Change the observe position to
While observe a
the alarmed position then return
specific position.
to the position that previously
observed.
Stop preset touring and change
While operating
the observe position to the
Preset Tour func-
alarmed position then restart the
tion.
preset touring again.
Stop auto panning and change
While operating
the observe position to the
Auto Pan func-
alarmed position then restart the
tion.
auto panning again.
While operating
Pattern function.
Note:
The Alarm In 1 is Preset 1, Alarm In 2 is Preset 2,
Alarm In 3 is Preset 3 and Alarm In 4 is Preset 4.
Connecting LKD1000 controller
Connecting the LKD1000 controller to control the cam-
era. (Refer to the manuals of the LKD1000 controller
for more details.).
Preset 4
Alarm 4
Preset 3
Alarm 3
Auto mode
Stop operating pattern func-
tion and change the observe
position to the alarmed position
then restart the pattern function
again.
Data Port Adapter
LKD1000 controller
TX-
TX+
17
Advertisement
Table of Contents
