Related Manuals for LG LVC-DV100 HM
Summary of Contents for LG LVC-DV100 HM
- Page 1 Operating Instructions LVC-DV100 HM HP LVC-DV101 HM HP Before installing and using the camera, please read these instructions thorough- ly and retain them for later reference. P/NO: 3834RC0022H...
-
Page 2: Regulatory Notices
Regulatory Notices For U.S.A CAUTION RISK OF ELECTRIC SHOCK This equipment has been tested and found DO NOT OPEN to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC CAUTION TO REDUCE THE RISK OF Rules. -
Page 3: Safety Precautions
1 Safety Precautions Do not attempt to disas- Avoid the camera with semble the camera direct sunlight To prevent electric shock, do not remove Do not aim the camera at bright objects. screws or covers. There are no user Never face it with direct sunlight or other serviceable parts inside. -
Page 4: What's In The Box
2 What's in the box Video Cable M4 Tapping Screws Camera Body (2EA) (Pan Lock Screw) Optional Adapter (DC 12V, 300mA) -
Page 5: Front View
3 Construction Front View LG logo 4-pin Dip Switch Tilt Base Zoom Lever Tilting Lock Screw Focus Lever Side View Dome Cover Lens Tilting Lock Screw Dome Cover Separatory Spring... -
Page 6: Rear View
4 Construction Rear View Dome Cover Separatory Spring Power In Video Out DC12V VIDEO (Option: Ext. Sync. or Audio) Pan Base Base Fixing Hole... -
Page 7: Installation
5 Installation Video Cable Connection RED Cable BLACK Cable WHITE Cable 1. RED : Connect the RED Cable to 1(+). 2. BLACK : Connect the BLACK Cable to 2(-). 3. WHITE : Connect the WHITE Cable to 3(V). -
Page 8: Camera Installation
6 Installation Camera Installation 1. Aim the LG logo of the Dome Camera to face the place that you wish to watch. 2. Tighten the M4 Tapping Screws to fix the Dome Camera on the ceiling, then adjust the Pan (Left / Right) by moving the Pan Base. - Page 9 7 Installation NOTE When you disassemble the Dome Cover, lift the Dome Cover • Separatory Spring on the opposite side of LG Logo and turn the Dome Cover clockwise simultaneously. Dome Cover Separatory Spring When you install the camera, handle with care. The camera •...
-
Page 10: Camera Connection
8 Installation Camera Connection Connect the Power Adapter (DC12V, 300mA; optional) to the Power Input Jack of the camera as shown below. Adapter Power Jack Input Jack Adapter Rear Panel Monitor... - Page 11 9 Setup 4-pin Dip Switch Setting This camera has the 4-pin Dip Switch inside of the camera for setting. 1. ALC / ELC : ELC (Electronic IRIS), ALC (Auto IRIS) The default setting is ALC. 2. Y/ DC IRIS : When you use Video Lens or DC IRIS Lens The default setting is DC.
-
Page 12: Backlight Compensation Setting
10 Setup Backlight Compensation Setting Backlight compensation eliminates strong background light which makes the camera picture dark such as a spotlight. You can select the mode for adjusting the iris lens. There are two mode as follows. 1. BLC : Set the BLC to ON. The lens iris is manually fixed at the value that you have set regardless of an object. -
Page 13: Troubleshooting
11 Troubleshooting Check the following guide for the possible cause of a problem before contacting service. The picture is poor. • Does the Dome Cover have lots of dust on the surface? Use a dry cloth to clean the camera when it is dirty. Smear may be caused to the screen of night than daytime. - Page 14 12 Dimension ø100 91mm 10mm 31mm ø121.5 DC12V VIDEO...
-
Page 15: Specifications
13 Specifications Model LVC-DV100/101HM LVC-DV100/101HP Signal System NTSC Total / Effective Pixels 410K/380K 470K/440K Pick-Up Device 1/3-Inch Interline Color CCD (Super HAD) Vari-Focal Lens Lens f=2.6 ~ 6.0mm/F=1.4, f=4.0 ~ 9.0mm/F=1.6 * 125°~60.0°(f=2.6~6.0mm) Angular Field of View 92.6°~39.4°(f=4.0~9.0mm) Focus Manual Signal Process Digital Signal Process Scanning System... - Page 16 MEMO...
Need help?
Do you have a question about the LVC-DV100 HM and is the answer not in the manual?
Questions and answers