Permobil C500 Service Manual page 43

ESP module
Fitting
1. Identify the correct holes (the holes are marked
with the chassis designation) and fit the ESP
module to the bracket using the four screws -
see figure.
2. Fit the ESP module and its bracket using the
two screws - see figure.
3. Attach the cable to the ESP module by
pressing it straight in - see figure.
4. Refit the seat lift cover and chassis cover - see
page 7.
The ESP module is held in place by four screws.
The ESP module's bracket is
held in place by two screws.
Connecting the cable to the ESP module.
43
ESP Module