Seat Lift Belt - Permobil C500 Service Manual

Seat lift belt

Removal
1. Remove the seat lift - see pages 31-32.
2. Loosen the two screws that hold the seat lift motor's shaft. Move the shaft sideways so that the belt
becomes slack - see figure below.
3. First remove the belt from the motor shaft's cogwheel and then from the seat lift screw's cogwheel.
Fitting and adjustment
1. First fit the belt on the seat lift screw's cogwheel and then on the motor shaft's cogwheel.
2. Adjust the belt tension by moving the motor shaft sideways. The belt is correctly tensioned when it
can be pressed in 4-5 mm - see figure below.
3. Tighten the two screws that hold the seat lift motor's shaft - see figure below.
4. Check the belt tension. Adjust as required as described in 2-3 above.
The seat lift motor shaft is held in place by two screws. The belt tension
can be adjusted after the two screws have been loosened.
4-5 mm.
37
Seat lift