Table of Contents
Advertisement
Dialog 5446 IP Premium
Switch from
speakerphone to
headset
Switch from
headset to
speakerphone
2.7
Headset
2.7.1
Using the Headset
Using a headset enables you to make and receive calls without using the
handset.
Make a call
Receive a call
Switch from
headset to handset
Switch from
handset to headset
Clear a call
2.7.1.1
Call Handling through the Line Buttons
By default, the phone is set to connect calls to the loudspeaker when you
answer incoming calls, or when you make calls by tapping a Line button. This
default setting is known as the loudspeaker preset mode. When you dial a
number without lifting the handset, the call is also connected to the loudspeaker
by default.
When you use a headset, you can switch to the headset preset mode to have
calls connected to the headset. If the headset preset mode is activated and you
press
Activating Headset
Preset Mode
16
Press
Press
Press
preset mode, you are not required to press the headset
key.
Press
Lift the handset.
Press
Press the C key.
, the call is connected to the loudspeaker.
To activate the headset preset mode, press and hold
down
and the headset icon appears in the display to the right,
the headset preset mode is activated.
.
.
and dial the desired number and. In headset
.
and replace the handset.
for 4 seconds. When you hear a ring signal,
6/1553-DBC 446 01 Uen D5 2008-09-10
Advertisement
Table of Contents
