Table of Contents
Advertisement
SIP Phones
1
2
3
4
5
Note: A tone is heard each time a participant enters or leaves the conference.
6.4
Parking
You can temporarily put the ongoing call on hold. Calls put on hold can be
resumed on your own or on another phone.
To put a call on hold, do the following:
1
2
To put a call on common hold, do the following (only valid for H.323 phones):
Note: To put call on common hold, the extension must be MNS represented.
1. Tap the Hold button.
2. Replace the handset.
6.4.1
Resuming a Call On Hold
To resume a call that has been put on hold, do the following:
1
6.4.2
Resuming a Call On Common Hold (only for H.323 phones)
To resume a call that has been put on common hold, do the following:
6/1553-DBC 446 01 Uen D5 2008-09-10
Tap the Line.
Dial the number to the third party and wait for an answer.
Tap the Call button.
Repeat the procedure to add more conference members.
Replace the handset or press C to leave the conference.
When the conference leader leaves the conference, the conference will
continue with the other included parties. The conversation is changed
back to a normal two party connection when there are only two parties
left.
Tap the Hold button.
If you tap Inquiry or the Line button where you have the call, the ongoing
call is automatically put on hold.
Replace the handset.
If you tap Inquiry or the Line button where you have the call, the ongoing
call is automatically put on hold.
Tap the Line button where you have the parked call.
During Calls
43
Advertisement
Table of Contents
