Aastra 7446ip User Manual

Ip phone for mx-one

Hide thumbs

page of 96

/ 96
Bookmarks

Quick Links

Download this manual

USER GUIDE

6/1553-DBC 446 01

G 2 012

Aastra 7446ip

IP Phone for MX-ONE

USER GUIDE

T Wolf

twelve

Need help?

Do you have a question about the 7446ip and is the answer not in the manual?

Questions and answers

Summary of Contents for Aastra 7446ip

Page 1 USER GUIDE 6/1553-DBC 446 01 G 2 012 Aastra 7446ip IP Phone for MX-ONE USER GUIDE T Wolf twelve...
Page 2 No parts of this publication may be subject to alteration, modification or commercial use. Aastra will not be liable for any damages arising from use of an illegal modified or altered publication.
Page 3 DISCLAIMER While every effort has been made to ensure accuracy, Aastra will not be liable for technical or editorial errors or omissions contained within this documentation. The information contained in this documentation is subject to change without notice.
Page 4 MPORTANT NFORMATION FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter- ference to radio communications.
Page 5 Utiliser seulement le cordon d’alimentation indiqué dans ce manuel. CONSERVER CES INSTRUCTIONS INTRODUCTION These directions for use describe the user procedures to handle the features available for the Aastra 7446ip phone (previously called Dialog 5446, but also known as DBC 446). 6/1553-DBC 446 01 Uen G 2012-02-22...
Page 6 The Aastra 7446ip phone conforms to the H.323 and the SIP standards. To find out which protocol is active, refer to 4.5 Software Version on page 24.
Page 7 IP P MX-ONE HONE FOR Important Safety Instructions Save these instructions. Read these safety instructions before use! Note: When using your telephone or connected equipment, the following basic safety precautions should always be followed to reduce risk of fire, electrical shock and other personal injury. Follow instructions in the equipment's user guide or other docu- mentation.
Page 8 ESCRIPTION Aastra 7446ip Description The Aastra 7446ip phone (previously called Dialog 5446, but also known as DBC 446) has a backlit display with a 480 x 272 pixels color touch screen. Most features are activated from the display, and the phone is equipped with a stylus for this purpose.
Page 9 IP P MX-ONE HONE FOR Figure 2: Aastra 7446ip: Back View All connections at the back of the phone are marked for easier identifi- cation. The tiltable stand makes it easy to connect the cables, and allows you to adjust the angle of the phone.
Page 10 7446 ASTRA ESCRIPTION If the telephone is equipped with a gigabit Ethernet unit (DBY 412 02) and connected to a 1 gigabit LAN, it can be powered by a power adapter, or by a power hub. If the telephone has the gigabit Ethernet unit installed, and is connected to a 10/100 megabit LAN, the telephone has to be powered by a power adapter.
Page 11 Most other telephony functions are invoked from the display, see 3.3 Display on page 12. Table 2 Aastra 7446ip Function Keys Function Press the loudspeaker key to enable handsfree connection.
Page 12 Figure 3: Menu Structure Display In the Aastra 7446ip phone, most functions are invoked from the display. When you have logged on to the phone, the main page is displayed, see below. Note: The look of the page may vary depending on which features are activated.
Page 13 IP P MX-ONE HONE FOR Figure 4: Display Menu The top of the display contains a menu bar with tabs that each open a page where you can access a number of services that are available for your extension. The tabs are, from left to right, applications and settings, shortcuts, messages, main page, call list, contacts, and internet.
Page 14 7446 ASTRA ESCRIPTION 3.3.1 Menu Tabs The menu tabs appear in the menu bar at the top of the display window. To open a page, tap the tab icon. Tap the applications and settings tab to open the Applications and Settings page, which contains the sub-pages My Availability and My Settings.
Page 15 IP P MX-ONE HONE FOR 3.3.2 Icons On the right side of the main page, a number of icons may appear in different situations. The icons are described below. System warning. Indicates reduced system access, which means that some features may not work. Reduced system access occur when the phone is registered to another exchange than the usual one.
Page 16 7446 ASTRA ESCRIPTION Callback. When you call a number and receive a busy tone, or there is no answer, you can order automatic callback for that number. As soon as the extension or line becomes free (or, when there is no answer, when the extension has been used), you will be called back.
Page 17 IP P MX-ONE HONE FOR Ring tone or queue tone Busy tone Congestion tone Vacant number tone Call waiting tone or verification tone Intrusion tone Conference tone* Connection in progress tone * The conference tone can be disabled by the system administrator. Note: The ring tones differ depending on the country where the phone is being used.
Page 18 7446 ASTRA ESCRIPTION Recall signal (Callback reminder) Note: The ring signals differ depending on the country where the phone is being used. 3.5.2.1 Ringing Volume To adjust the ring volume, press the - and + keys on the phone in idle mode (when no call is connected), or when the phone is ringing.
Page 19 IP P MX-ONE HONE FOR Answer a call Tap the line button that indicates an incoming call (the button's light indicator is blinking). Make a call Dial the number you want to call. When someone answers, the speakerphone is activated. You can then either pick up the handset, or continue to use the speakerphone.
Page 20 TARTING THE HONE 3.7.1.1 Call Handling through the Line Buttons By default, the phone is set to connect calls to the loudspeaker when you answer incoming calls, or when you make calls by tapping a Line button. This default setting is known as the loudspeaker preset mode. When you dial a number without lifting the handset, the call is also connected to the loudspeaker by default.
Page 21 IP P MX-ONE HONE FOR After a power failure the phone restarts automatically. Note: During power-up, the phone display is black for a little while. 4.1.1 Logging On to the Network Your phone might require a network authentication to gain access to the network.
Page 22 TARTING THE HONE Figure 5: Software Update Screen You have two options: Select No to skip the update and keep the current software version. Select Yes to start downloading the software update from the software server. The update process takes approximately 60 seconds to complete, and the progress is displayed on screen.
Page 23 IP P MX-ONE HONE FOR 4.2.1 Free User The phone must be logged on (registered) to the telephony system to be used. When the telephone is logged off, the display will look like in the figure below. Figure 6: Log on menu When the log on screen appears, do the following: Enter your personal extension number in the Log on with field.
Page 24 TARTING THE HONE To log on with your personal number, do the following: Press more... select Log On Temporary User. Enter your personal extension number in the Log on with field. Enter your personal extension number in the Log on with field. If you are prompted for a PIN or password, enter your PIN or pass- word in the Enter PIN or password field.
Page 25 IP P MX-ONE HONE FOR The currently installed software version is shown. The system auto- matically checks for new software versions, and when an update is available, a message appears during logon, asking you if you want to install it until you return to the main page.
Page 26 NCOMING ALLS • Without delay: The call is answered immediately, no ring signal is heard. Changing the automatic answer setting requires administrator rights, but you can view the current settings. To view the automatic answer settings, do the following: icon at the top menu bar. Select My Settings and then Auto answer.
Page 27 IP P MX-ONE HONE FOR Dial the extension number and wait for a busy tone. Tap the CallPickUp button. Start the conversation. SIP Phones Lift the handset and wait for a dial tone. Dial the extension number, tap the Call button, and wait for a busy tone.
Page 28 UTGOING ALLS To restore parallel ringing on one phone in the list, deactivate Follow-me to from that phone, see 8.1.2 Canceling Follow-me From Your Own Phone on page 44. Restoring On All Phones To restore parallel ringing on all phones in the list, deactivate Follow-me from these phones, see 8.1.4 Canceling Follow-me from Another Phone on page 45.
Page 29 IP P MX-ONE HONE FOR H.323 Phones Lift the handset and wait for a dial tone. Dial the external access code and the desired external number and wait for an answer. SIP Phones Lift the handset and wait for a dial tone. Dial the external access code and the desired external number, and tap the Call button.
Page 30 UTGOING ALLS (Available in H.323 phones only) If all external lines are busy. You can have only one callback on busy external line activated at the same time. As soon as the extension or line becomes free (or, when there is no answer, when the extension has been used), you will be called back.
Page 31 IP P MX-ONE HONE FOR SIP Phones Lift the handset and wait for a dial tone. Dial # 37 # and tap the Call button. The callback indicator icon is turned off. Replace the handset. This procedure cancels callbacks to internal parties, busy extensions in private network, and busy external lines.
Page 32 UTGOING ALLS H.323 Phones Tap the Callback button and wait for a dial tone. Dial the complete external number, part of it or no number. Dial #. The callback indicator icon is highlighted. Replace the handset. SIP Phones Press the numeric key 6 and wait for a dial tone. Dial the complete external number, part of it or no number.
Page 33 IP P MX-ONE HONE FOR Keep handset off hook. If the called party answers your call waiting request, the call will be established. If the called party does not want to answer your call, you will continue to hear the ring tone until you go on hook.
Page 34 UTGOING ALLS Before the intrusion is performed, a warning tone is sent to the parties in the ongoing call. As long as the three parties are connected, you will hear a warning tone. Note: The warning tone can by categorization be disabled, both before and during the intrusion.
Page 35 IP P MX-ONE HONE FOR Emergency Calls (SOS Calls) You can always make an emergency call, regardless of whether you the phone is logged on to the exchange or not. However, the procedure differs depending on the logon status. When the phone is logged on When the phone is logged on to the exchange, dial the emergency number (SOS number).
Page 36 UTGOING ALLS Redial Calls 6.5.1 Redial an External Number To redial the last dialed external number, do the following: H.323 Phones Lift the handset and wait for a dial tone. Dial *** (while in idle state or with dial tone). The last dialed external number is redialed automatically.
Page 37 IP P MX-ONE HONE FOR exchange. These common speed dialing numbers consist of between 1 and 5 digits. H.323 Phones Lift the handset and wait for a dial tone. Dial the speed dialing number. SIP Phones Lift the handset and wait for a dial tone. Dial the speed dialing number and tap the Call button.
Page 38 UTGOING ALLS 6.7.2 Programming Shortcut Keys Before you can program a shortcut key, make sure the phone is logged on to the exchange. To program a name key, do the following: in the menu bar to open the Shortcut pages. If the key you want to program is free, tap on the key.
Page 39 IP P MX-ONE HONE FOR Number Presentation Restriction If you do not want your name and number to be displayed to the person you are calling, you can order number presentation restriction. When you have ordered number presentation restriction, instead of your name and number, the text Anonymous will appear in the display of the phone you are calling.
Page 40 URING ALLS H.323 Phones Tap Inquiry. The ongoing call is automatically put on hold. Dial the extension or external number. SIP Phones Tap Line. The ongoing call is automatically put on hold. Dial the extension or external number. 7.1.2 Referring Back During inquiry you can switch between the ongoing call and the parked call.
Page 41 IP P MX-ONE HONE FOR H.323 Phones Tap Inquiry and wait for a dial tone. Dial the desired extension or external number. Tap Transfer before or after answer. The parked call is transferred. SIP Phones Tap Line and wait for a dial tone. Dial the desired extension or external number and tap Call.
Page 42 URING ALLS Replace the handset or press C to leave the conference. Note: A tone is heard each time a participant enters or leaves the conference. When the conference leader leaves the conference, the conference will continue with the other included parties. The conversation is changed back to a normal two party connection when there are only two parties left.
Page 43 IP P MX-ONE HONE FOR Sending Caller Identity Code at Transfer (Available in H.323 phones only) When you transfer a call, you can send the caller’s Identity Code (CID) or number to the receiver’s display by dialing a feature code during an external call.
Page 44 ORWARDING Follow-me This feature enables you to redirect incoming calls to other extensions. With the Follow-me feature, you can divert calls to your extension to another extension within the private network. If, for example, you are temporarily working in another room and want your calls to follow you to that room, you can use the internal Follow-me feature.
Page 45 IP P MX-ONE HONE FOR The first step is to allow that follow-me is permitted to be done from another telephone. Do the following from your own telephone: Press Availability. Select Follow-me. Enter your own extension number. Tap the Done button To order follow-me from another phone: Lift the handset and wait for a dial tone.
Page 46 ORWARDING Dial *21*extension number to divert * extension number of the new answering position#. Tap the Call button. Wait for special dial tone. Replace the handset. 8.1.6 Canceling Follow-me Remotely To cancel remote programming of follow-me from another telephone than the telephone with the diverted number: H.323 Phones Lift the handset and wait for dial tone.
Page 47 IP P MX-ONE HONE FOR 8.2.1 Ordering External Follow-me from your Phone To order external follow-me from your phone, do the following: Tap the Availability button. Select the External Follow-me menu. Enter the external number and tap Done. The Follow-me icon is shown in the display.
Page 48 ONTACTS Tap the Call button. Wait for special dial tone. Replace the handset. The Follow-me key is lit and the and the display shows the external follow-me text, on the telephone that has been diverted. 8.2.4 Canceling External Follow-me Remotely To cancel the remote programming of external follow-me for another extension, do the following: H.323 Phones...
Page 49 IP P MX-ONE HONE FOR The recommendation is to use the soft keyboard to edit the contact name. My Contacts 9.1.1 Calling a Contact There are two ways to open the contact list and find the contact; from the display or from the keypad. From the Display to open the Contacts page.
Page 50 ONTACTS 9.1.3 Adding a Contact From the Call List To add a contact from the call list, do the following: to open the Call List page. Select more... and select Add to contact. Edit name or number if necessary. You can also select a ring signal for this Contact by tapping more...
Page 51 IP P MX-ONE HONE FOR - Corporate Directory - Select. The page with search criteria is shown. Enter the name or number that you wish to search and press Search To search a name, enter the last name first, then the first name, adding a space between the last and first names.
Page 52 IP address to the phone. Note: You find the IP address of the phone by clicking , and selecting My Settings, Help, About Aastra 7446ip, Phone IP Address. Click OK. All available Microsoft Outlook contacts are listed on the left side and the contacts that are already in your phone are listed on the right side.
Page 53 IP P MX-ONE HONE FOR If you are authorized, you can also enter presence information for another extension from your extension. Note: Your phone can be used for outgoing calls even if an absence reason is selected. You will hear a special dial tone when you lift the handset.
Page 54 ESSAGES your mailbox and listen to the received messages. If you use the Personal Number feature, it is recommended to program Voice Mail as the last answering position for all search profiles. If using the H.323 protocol, when you have one or more messages waiting, you can enter the voice mailbox by tapping to the right in the display.
Page 55 IP P MX-ONE HONE FOR H.323 Phones Lift the handset and wait for a dial tone. Dial * 32 #, or dial the number of the message retrieval center. Replace the handset. SIP Phones Lift the handset and wait for a dial tone. Dial * 32 # and tap the Call button, or dial the number of the message retrieval center.
Page 56 ROUP EATURES SIP Phones Lift the handset and wait for a dial tone. Dial # 31 # and tap the Call button. Replace the handset. Group Features 12.1 Group Call-pick-up The group call-pick-up feature allows any member of a group to answer any individual calls to the members of that group.
Page 57 IP P MX-ONE HONE FOR SIP Phones Lift the handset and wait for a dial tone. Dial * 8 # and tap the Call button to answer the call. The group call-pick-up feature allows any member of a group to answer any individual calls to the members of that group.
Page 58 THER SEFUL EATURES calls will be forwarded to an answering position defined for the whole group or the calling party receives a number unobtainable tone. An extension with group do not disturb activated can still make outgoing calls as usual. 12.3.1 To Order Group Do Not Disturb A categorized extension can activate group do not disturb by dialling the...
Page 59 IP P MX-ONE HONE FOR Account codes allows you to keep track of where different outgoing calls are charged. The account code feature enables you to do the following: • have calls charged to a specified account, representing a particular project, department or client, rather than to the calling extension number.
Page 60 THER SEFUL EATURES Dial *61* account code #. (Tap Call if it is a SIP phone) Wait for a dial tone. Tap on the Line key to retrieve the call. 13.2 Authorization Code Authorization codes are used to control or limit the access to an exten- sion.
Page 61 IP P MX-ONE HONE FOR H.323 Phones Dial * 72 * authorization code #. 72 is the standard function code for common authorization code dialing. When you hear a verification tone, continue to dial the external number. SIP Phones Dial * 72 * authorization code # and tap the Call button. 72 is the standard function code for common authorization code dialing, When you hear a verification tone, continue to dial the external...
Page 62 THER SEFUL EATURES When you hear a verification tone and the lock icon disappears from the display, the extension is unlocked. Note: If the telephone is unlocked, you do not have to dial any authori- zation code . 13.2.2 Individual Authorization Code If your extension has an individual authorization code associated with it, you can lock your own extension to a service profile when, for example, you are out of the office.
Page 63 IP P MX-ONE HONE FOR 13.2.2.2 Dialing From Other Extension To make a call from an extension with an individual authorization code (using another phone), do the following: Dial *75* authorization code * own extension number #. Wait for a verification tone. Dial the external number.
Page 64 THER SEFUL EATURES To change the individual authorization code for an extension, do the following: Dial *74* previous authorization code * new authorization code #, (tap Call, if it is a SIP phone) When you hear a verification tone, the individual authorization code has been changed.
Page 65 IP P MX-ONE HONE FOR 13.6 General Deactivation General deactivation enables you to cancel features using one single command. The following features are canceled with the general deacti- vation feature: • Callback. All callback missions are cancelled. • Follow-me and External follow-me •...
Page 66 THER SEFUL EATURES 13.8 Least Cost Routing Least cost routing (LCR) is a feature that automatically selects the least expensive way to connect an external call. The LCR feature can be accessed by dialing the Least Cost Routing Access Code (LAC). By using LAC you will automatically be routed over the least expensive route available.
Page 67 IP P MX-ONE HONE FOR Dial with the external number. If no free trunk is selected, you will hear a busy tone. You enable on-hook queuing by dialing the suffix digit for callback to the busy route. If the selected route is marked as expensive, you will receive an Expensive Route Warning Tone which enables you to stop further call routing.
Page 68 THER SEFUL EATURES 13.10 Night Service The console is set in either day service mode or night service mode. During night service, incoming external calls are transferred to a desig- nated extension or group of extensions. Night service mode is used outside business hours.
Page 69 IP P MX-ONE HONE FOR Replace the handset. Deactivating flexible night service To deactivate flexible night service, do the following: H.323 Phones Lift the handset and wait for a dial tone. Dial # 84 #. Replace the handset. SIP Phones Deactivating flexible night service To deactivate flexible night service, do the following: Lift the handset and wait for a dial tone.
Page 70 THER SEFUL EATURES 13.11.2 To Cancel Do Not Disturb Lift the handset (special dial tone). Dial #27#. Dial tone Replace the handset. 13.12 Personal Number and Profiles With the personal numbers and profiles feature a number of answering positions can be defined in a profile. When somebody calls your normal office phone number the call will be announced on the telephones defined in your active profile.
Page 71 IP P MX-ONE HONE FOR 13.12.3 Designing and Ordering Your Search Profiles When you are creating your search profiles, you should consider the following: • Avoid ring times longer than 45 seconds for your profiles. Callers typically hang up after 3-6 ring signals. •...
Page 72 THER SEFUL EATURES Search Type of phone or Phone Ring time order answering position number (seconds) Examples: Desk, Cordless, Mobile, External, Voice Mail, Operator, and so on Cordless 52341 Voice Mail 55555 Table 4 Profile 2 - At home Search Type of phone or Phone Ring time...
Page 73 IP P MX-ONE HONE FOR 13.13.1 Activate the Boss-Secretary feature 13.13.1.1 From the secretary’s phone Activate the Boss-Secretary feature from the secretary’s phone • , and then tap the PEN key associated to the boss. The PEN key indication is lit on the secretary’s phone. •...
Page 74 ETTINGS When there is a call to the boss, it is announced on the secretary's phone as shown above. 13.13.2 Deactivate the Boss - Secretary feature. 13.13.2.1 From the secretary’s phone Deactivate the Boss-Secretary feature from the secretary’s phone • , and then tap the PEN key associated to the boss.
Page 75 IP P MX-ONE HONE FOR • My mobile phone • Free on busy 14.1.1 My Presence To modify the presence status, do the following: , select My Availability. Select My Presence. Select the desired absence reason, and enter the return time and date if required and press Select.
Page 76 ETTINGS Enter the number of the profile (personal number list) and press See also section13.12 Personal Number and Profiles on page 70. 14.1.5 My Mobile Phone To edit your mobile phone number, do the following: , select My Availability. Select My mobile phone, and press Select. Enter your mobile phone number and press Done.
Page 77 IP P MX-ONE HONE FOR Press the key to program as a shortcut. Press more..Select Add new from Call List. Select a number from the call list, and press Add. Press Done to save the shortcut. Press more... to edit the data or label before saving. 14.2.3 Adding New Shortcut From Contacts To add a shortcut from your contacts list, do the following:...
Page 78 ETTINGS 14.2.5 Deleting a Shortcut To delete a shortcut, do the following: , My Settings and select Shortcuts Press the shortcut to delete and press more..Tap Delete. A confirmation message is displayed. Press Yes to confirm. To delete all shortcuts: , My Settings and select Shortcuts Press more..
Page 79 IP P MX-ONE HONE FOR 14.3.1.1 Downloading Melodies Instead of standard ring signals, you can download up to 10 melodies to your phone. To download a melody from a specified server, do the following: and My Settings. Select Sounds and press Ring Signals. Select Default Ring Signals.
Page 80 ETTINGS , and My Settings Select Sounds and press Alert. Select Alert 1st call or Alert 2nd or 3rd call, and press Select. Select an alert, and then press Save. 14.3.2.2 Changing Alert For Monitored Extensions To change the alert signal for monitored extensions, do the following: Press , My Settings and select Shortcuts.
Page 81 IP P MX-ONE HONE FOR 14.4.2 Modifying Brightness Hold Time To modify the brightness hold time, do the following: , My Settings and select Display. Select Brightness Hold time. You can modify the hold time to 1, 2, 5, 10, 30 or 60 minutes. Tap on the desired brightness hold time.
Page 82 ETTINGS 14.6 Time and Date The time and date are updated automatically through the exchange, but you can adjust the format in which the time and date are displayed. 14.6.1 Time Format To change the time format, do the following: , My Settings and select Time &...
Page 83 IP P MX-ONE HONE FOR Tap Save to confirm the selection. 14.8 Security and Access It is possible to view and change the PIN code, if this option has been configured by system administrator. 14.8.1 Changing PIN Code You can change the PIN code used for logging on to the telephony system.
Page 84 Help menu, depends on how the phone is configured. Contact the system administrator for more information. Web Browser The Aastra 7446ip phone has a built-in web browser which can be accessed from the menu bar at the top of the display window. 15.1...
Page 85 IP P MX-ONE HONE FOR Tap in the input field to activate it and enter a valid web address. The requested page starts loading. Note: For faster downloading, you are recommended to use only web pages that are optimized for mobile phones. 15.2 Using the Web Browser The built-in web browser contains a number of icons which you use to...
Page 86 NTERFACE The stop navigation button. Tap to stop loading a requested page. The reload navigation button. Tap to reload the currently requested page. The home navigation button. Tap to go to the start page. The add bookmark button. Tap to bookmark the current page.
Page 87 Accessing the Telephone's Web Interface To access the telephone's web interface, do the following: , My Settings and select Help. About Aastra 7446ip is displayed Tap Select. Select Phone IP Address and press Select to see the IP address. Enter the IP address in the address field of the web browser in your Start using the features in the web interface, see next section.
Page 88 NTERFACE Enter your password (or PIN code) and click Log on. Note: Use the same password (or PIN code) as you use to log on your phone. If you have no logon password (or PIN code), you cannot log on to the web interface, unless the system administrator has enabled the default password Welcome.
Page 89 IP P MX-ONE HONE FOR Expand the folder(s) by clicking on the plus signs. You can select among the following features: Contacts. Select if you want to add or delete entries. Call list Select if you want to delete the call list. Settings Includes the options Shortcuts, Sounds and Security and Access.
Page 90 6 Features and Procedures on page 90 summarizes the procedures for the H.323 version of the Aastra 7446ip phone. For the SIP version of the phone you also have to tap the Call button at the end of the procedure.
Page 91 IP P MX-ONE HONE FOR - busy external line Press key 6 to cancel: - busy extension or no reply #37*extension number# - busy external line #37*external number# - all ordered callbacks #37# BYPASS *60*B-number# CALL PICK UP individual Press key 8 group CALL WAITING not applicable...
Page 92 IST OF EATURES AND ROCEDURES to cancel from own extension #21# to cancel from answering #21*A-number # position to order new follow-me *21*A-number*C-number# position to order from another *21*extension extension number to divert * number of follow-me position# to cancel from another #21*diverted extension extension number#...
Page 93 Telephony Function Codes This section describes the country specific function codes used in MX-ONE that are relevant for the Aastra 7446ip phone. The following application systems are concerned: Australia, Austria, Belgium, Brazil, China, Denmark, Export, Finland, France, Germany, Hong Kong A-law, Hong Kong My-law, Indonesia, Ireland, Italy,...
Page 94 ELEPHONY UNCTION ODES Intrusion France: 8 New Zealand: 8 Sweden: 8 Call Waiting Indication France: 6 New Zealand: 6 Sweden: 4 Call Back France: 5 New Zealand: 5 Sweden: 5 Common Parking or Individual France: 4 Call Pick-up New Zealand: 4 Sweden: 6 Service Codes General Deactivation...
Page 95 IP P MX-ONE HONE FOR Malicious Call Tracing Calling Line Identification Restriction Per Call By-pass of Diversion North America: 1 Account Code Predialing Finland: 71 Norway: 71 Authorization Code Predialing Germany: 75 The Netherlands: 75 North America: 6 Sweden: 75 Lock/Unlock Common North America: 71 Authorization Code...
Page 96 ELEPHONY UNCTION ODES Conference Maximum number of parties when external lines are connected Maximum number of parties in a conference Maximum number of public North America: 6 trunk lines in a conference Maximum number of external North America: 6 lines in a conference PBX Operator Service Codes Selection of a specific line North America: 3...

This manual is also suitable for:

Dialog 5446 Dbc 446