Table of Contents
Advertisement
13
Other Useful Features
13.1
Account Code
An account code is a code that makes it possible to charge a call to an account
number, and to prevent unauthorized calls from the phone. Usually the account
code must be entered before the destination number.
13.1.1
General
It is possible to set account code preferences for extensions and the external
numbers for least cost routing. There are two categories, forced and optional
account code dialing.
Forced
Optional
Note: An account code can be linked to ongoing calls, incoming as well as
13.1.2
Dialing the Account Code before a Call
To dial the account code before dialing the destination number, do the following:
H.323 Phones
1
2
3
4
SIP Phones
1
2
6/1553-DBC 446 01 Uen D5 2008-09-10
The user is required to dial a valid account code before
the destination number. The call is rejected unless a
valid code has been provided.
The user is not required to dial an account code before
the destination number. The call is accepted in either
case.
outgoing. Previously stored account codes will then be overwritten.
Lift the handset.
Dial * 61 * account code # ,
where 61 is the standard function code for using account code. If provided,
a dial tone is received.
Dial the external number.
Replace the handset to end the call.
Lift the handset.
Dial * 61 * account code # ,
Other Useful Features
65
Advertisement
Table of Contents
