Table of Contents
Advertisement
answer, the external number you have called is automatically transmitted, but
you may have to dial any remaining digits.
5.2.3
Call Waiting
If the calling party has activated the CallWaiting feature in their phone, and the
system administrator has configured your phone to accept CallWaiting calls,
the Line 2 button blinks to indicate that a second incoming call is waiting.
5.2.3.1
Activating Call Waiting
To send a call waiting signal to the busy number, do the following:
Tap the CallWaiting button or press the numeric 5 when you get a busy tone.
Note: If the CallWaiting feature cannot be used due to categorization, you
If the busy extension ignores the CallWaiting indication, you can order
automatic Callback, see Section 5.2.1 Callback on page 30.
5.2.3.2
Answering a Call Waiting Signal
To answer a waiting call, tap Line 2. The first call is put on hold automatically.
To terminate the ongoing call, press C before answering the second call by
tapping the line button.
If you need to get through to a busy extension, you can inform the extension
that there is a call waiting. Call Waiting is indicated either by a tone (if the
busy extension is an analog phone extension), or as a second call (if the busy
extension is a digital system phone or an IP phone).
Note: If the called extension does not accept Call Waiting signals, you will
Whether an extension can initiate or receive a Call Waiting indication is
controlled by a category, which is set by the system administrator.
5.2.3.3
Canceling Call Waiting
To cancel Call Waiting, tap
6/1553-DBC 446 01 Uen D5 2008-09-10
will continue to hear a busy tone.
continue to hear a busy tone. If the busy extension ignores the Call
Waiting tone, you can order callback.
.
Outgoing Calls
33
Advertisement
Table of Contents
