Dvd Player + Tv + Vcr + Satellite Receiver - RCA RC6000P User Manual

DVD Player + TV + VCR + Satellite Receiver

1. Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the
back of your DVD Player, and to the corresponding Audio Input jacks on your TV.
2. Connect the video cable.
• 525P (480P) video (optional) – If your TV has component video (Y, P
video-grade cables for the Y, P
color coded connectors with a compatible TV. If your TV doesn't have component video,
use the S-video or the basic video connection listed below.
Important Note: Consult your TV User's Manual to find out if your TV supports
Progressive Scan. If Progressive Scan is supported, follow the TV User's Manual's
instructions regarding Progressive Scan settings in the TV's menu system.
• S-Video (optional) – If your TV has an S-Video Input jack, connect the S-Video cable to the
S-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If
your TV doesn't have S-Video, use the basic video connection listed below.
• Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on
the back of your DVD Player, and to the Video Input jack on your TV.
3. Use a coaxial cable to connect the antenna output on the satellite receiver to the antenna input
on the VCR.
4. Connect a coaxial cable to the antenna output jack on the VCR and to the Antenna Input jack
on the television.
5. Plug the power cord into an AC outlet.
chapter 1
Connections and Setup
, and P connections. Note that it is essential to match the
B R
OR
OR
, and P jacks) use
B R
Go to page 17
13