The Audio Options Menu; Selecting Digital Output Type; Dts; Dynamic Compression - RCA RC6000P User Manual

Rca rc6000p dvd player user's manual
Table of Contents

Advertisement

The Audio Options Menu

Selecting Digital Output Type

If you have a receiver with a digital signal input, use this feature to select your player's type of
digital output.

DTS

Turn this option on ONLY if you connected a DTS receiver or decoder to your DVD Player.
1. With no disc playing, press MENU (the Main Menu appears).
2. Press 6 to select Audio Options (the AUDIO OPTIONS screen appears).
3. Press 2 to highlight the DTS option.
4. Use the left/right arrow buttons to toggle the setting on or off.

Dynamic Compression

This feature compresses the dynamic range (quietest sound to loudest sound) of a disc's soundtrack. For
example, action scenes might be very loud, while whispered dialog is quiet. The Dynamic Compression
feature evens out the range of the volume by making loud sounds quieter and soft sounds louder. The
Dynamic Compression option is a toggle, it can be turned on or off. The default setting is on.
1. With no disc playing, press MENU (the main menu appears).
2. Press 6 to select Audio Options (the AUDIO OPTIONS screen appears).
3. Press 3 to highlight the Dynamic Compression option.
4. Use the left/right arrow buttons to toggle the setting on or off.
chapter 6
The Menu System
1. With no disc playing, press MENU (the main menu appears).
2. Press 6 to select Audio Options (the AUDIO OPTIONS screen
appears).
3. Press 1 to select Digital Output.
4. Use the left/right arrow buttons to select the type of output your
receiver uses.
PCM This is the default setting. Allows downsampling of 96kHz/24-
bit digital recordings so that 48kHz/16-bit digital recordings can be
made directly via digital cable.
Bitstream This setting turns on the digital optical output. Do not
use this setting unless you have hooked up your DVD player to an
external audio product via the optical jack. Some older digital
components are not compatible with the Bitstream setting. If you
experience noise and distortion during Dolby Digital playback, select
PCM instead.
5. Press GO BACK to return to the main menu.
59

Advertisement

Table of Contents
loading

Table of Contents