Table of Contents
Advertisement
DVD Player + TV + VCR + Satellite Receiver
1.
Connect the audio cables to the AUDIO OUT L (left – white) and R (right – r
jacks on the back of your DVD Player , and to the cor responding Audio Input jacks
on your TV.
2.
Connect the video cable(s).
A.
Basic video connection – Connect the video cable (yellow) to the VIDEO
OUT jack on the back of your DVD Player , and to the V ideo Input jack on
your TV.
B.
S-Video (optional) – If your TV has an S-V ideo Input jack, connect the S-
Video cable to the S-VIDEO OUT jack on the back of your DVD Player and to
the S-V ideo jack on your TV . If your TV doesn' t have S-V ideo, use the basic
video connection listed above.
C.
Component video (optional) – If your TV has component video (Y , P
P
jacks) use video-grade cables for the Y , P
R
it is essential to match the color -coded connectors with a compatible TV . If
your TV doesn' t have component video, use the S-V ideo or Basic video
connection listed above.
3.
Set the VIDEO OUT SELECT switch to S-VIDEO or YPbPr , depending on the type
of connection you used. Either setting works for the Basic video connection (2A).
4.
Use a coaxial cable to connect the antenna output on the satellite r
antenna input on the VCR.
5.
Use a coaxial cable to connect the OUT TO TV jack on the VCR to the antenna
input on the TV .
Chapter 1
Connections and Setup
OR
OR
, and P
B
ed)
, and
B
connections. Note that
R
eceiver to the
Go to page 14
13
Advertisement
Table of Contents
