Dvd Player + Tv + Vcr + Satellite Receiver - RCA RC5240P User Manual

DVD Player + TV + VCR + Satellite Receiver

1. Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the back of
your DVD Player, and to the corresponding Audio Input jacks on your TV.
2. Connect the video cable.
• Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of
your DVD Player, and to the Video Input jack on your TV.
• S-Video (optional) – If your TV has an S-Video Input jack, connect the S-Video cable to the S-VIDEO
OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TV doesn't
have S-Video, use the basic video connection listed above.
3. Connect a coaxial cable to the antenna output jack on the VCR and to the Antenna Input jack on the
television.
4. Use a coaxial cable to connect the antenna output on the satellite receiver to the antenna input on the
VCR.
5. Plug the power cord into an AC outlet.
chapter 1
Connections and Setup
OR
Go to page 19
15