Dvd Player + Tv + Vcr - RCA RC6000P User Manual

chapter 1
TV (BACK PANEL)
AUDIO IN
L R
1
DVD PLAYER
(BACK PANEL)
Y Pb Pr
525P (480P) VIDEO OUT
Progressive Scan hook-up
VCR (BACK PANEL)
L R
OUT
AUDIO
IN
L R

DVD Player + TV + VCR

1. Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the
back of your DVD Player, and to the corresponding Audio Input jacks on your TV.
2. Connect the video cable.
• 525P (480P) video (optional) – If your TV has component video (Y, P
video-grade cables for the Y, P
color coded connectors with a compatible TV. If your TV doesn't have component video,
use the S-video or the basic video connection listed below.
Important Note: Consult your TV User's Manual to find out if your TV supports
Progressive Scan. If Progressive Scan is supported, follow the TV User's Manual's
instructions regarding Progressive Scan settings in the TV's menu system.
• S-Video (optional) – If your TV has an S-Video Input jack, connect the S-Video cable to the
S-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If
your TV doesn't have S-Video, use the basic video connection listed below.
• Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on
the back of your DVD Player, and to the Video Input jack on your TV.
3. Connect the antenna or cable to the Antenna Input jack on the VCR.
4. Connect a coaxial cable to the antenna output jack on the VCR and to the Antenna Input jack
on the television.
5. Plug the power cord into an AC outlet.
Connections and Setup
COMPONENT VIDEO INPUT
VIDEO IN S-VIDEO IN Y P B P R
IN FROM ANT
2
OR
DIGITAL AUDIO OUT
ANALOG AUDIO OUT MIXED AUDIO OUT VIDEO OUT
PCM/BITSTREAM
L L
R2 L2 V2
OPTICAL COAXIAL
SW
R–SURROUND–L
R
R1 L1 V1
R–FRONT–L CENTER
VIDEO
, and P connections. Note that it is essential to match the
B R
OR
OR
ANT IN
4
S-VIDEO OUT COMPONENT VIDEO OUT
Pr Y
Pb
OUT TO TV
3
IN FROM ANT
CABLE OR OFF-AIR SIGNAL
, and P jacks) use
B R
Go to page 17
9