How To Find Your Tv's Video Input Channel - RCA RC6000P User Manual

Connections and Setup

How to Find Your TV's Video Input Channel

You need to tune your TV to the Video Input Channel (or S-Video Channel if you connected the S-
Video cable to your TV and to your DVD Player) to see the DVD Player's menu and to see the
content that's on a disc. The video channel on TVs varies for different brands and different models.
In order for your DVD remote to work, your TV must be set on the correct video input channel.
Below are some things to try.
• If your TV brand is RCA, GE, or PROSCAN, press the TV button on the remote that came with
your TV (not the DVD remote). Then press the INPUT button on the remote.
• If you have another brand, consult your TV's Owner's Manual.
If those options don't work, try one of the following options.
• Press a button on the TV remote (see table below).
• Select it from the TV's menu system.
• Tune directly to the DVD input channel by pressing a specific number (see table below).
• Go through all the channels in the channel list by pressing the channel up/down buttons on
the TV.
Some common scenarios are listed in the following table:
Video Input Channel Variations
Button/switch
on the TV
VIDEO
SIGNAL
VID 1
VID 2
S-VID
S-VIDEO
18
Button on the Channel #
TV Remote
VID 1 00
LINE 90
VID 91
VIDEO 92
S-VID 93
INPUT VID 1
S-VIDEO VID 2
SOURCE
AUX
chapter 1