If The Video Cd Has Playback Control; Bypassing Playback Control; Resuming Playback Control; Chapter 5: Playing Video Cds (Continued) - RCA RC6000P User Manual

To Load and Play a Video CD
All Hands in the Cookie Jar
All Hands in the Cookie Jar
Insert with the label
facing up.

If the Video CD Has Playback Control

If a disc is encoded with the playback control function, a menu screen appears after the disc is
loaded into the player.
1. Use the number buttons on the remote to select a track.
2. Press OK or PLAY to begin playback of the selected track.
3. Press CH + or CH – on the remote to scroll through the tracks.
4. Press GO BACK to stop playback and return to the menu or press STOP to stop playback and
remove the menu from the screen.

Bypassing Playback Control

If a Video CD has playback control, you can bypass the disc's menu by following these steps
when you first load the discs.
1. Press STOP to put the player in the stop mode.
2. Use the number buttons on the remote to enter the desired track number, and then press
PLAY. When playback begins, the disc will respond as if it is not in the Playback Control mode.

Resuming Playback Control

To resume the Playback Control mode, press MENU (the disc's menu appears).
chapter 5
1. Press the OPEN•CLOSE button on the front of the DVD player.
2. Place a disc gently into the tray with the disc's label facing up.
3. Press OPEN•CLOSE or PLAY to close the disc tray.
The DVD player reads the disc's table of contents, and then displays the playback control
menu or begins disc playback.
4. Press STOP to stop playback.
Playing Video CDs
49