Table of Contents
Advertisement
DVD Player + TV + VCR + Satellite Receiver
1. Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the back of
your DVD Player, and to the corresponding Audio Input jacks on your TV.
2.
Connect the video cable.
A. Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of
your DVD Player, and to the Video Input jack on your TV.
B. S-Video – (optional) If your TV has an S-Video Input jack, connect the S-Video cable to the S-VIDEO
OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TV doesn't
have S-Video, use the basic video connection listed above.
C. Component video (optional, not shown in illustration) – If your TV has component video (Y, P
P
jacks) use video-grade cables for the Y, P
R
color coded connectors with a compatible TV. If your TV doesn't have component video, use the basic
video connection or the S-Video connection listed above.
3. Use a coaxial cable to connect the antenna output on the satellite receiver to the antenna input on the
VCR.
4. Use a coaxial cable to connect the antenna output on the VCR to the antenna input on the TV.
5.
Plug in the AC power cord into an AC outlet.
Chapter 1
Connections & Setup
OR
OR
, and P
connections. Note that it is essential to match the
B
R
, and
B
Go to page 20
17
Advertisement
Table of Contents
