Making Basic Calls; Using The Handset; Putting A Call On Hold; Using Display Keys To Access Features - Aastra Maestro 4625 Owner’s Owner's Manual

Making basic calls

Using the handset

When you receive a call, the display
shows caller information.
Note: You must subscribe to Caller
ID service from your local telephone
company.
The handset power switch must be
ON in order to receive or make
calls.
To answer a call
When you hear the phone ring and see the
multipurpose light flash:
1. Press t or any key on the dial
pad. The , , and
> <
will not answer a call.
2. Press e to hang up or put the
handset on the base.
Note: The message
alternate on the display with the
callers incoming name. Press the
display key to view the long
distance number.
To dial a number
1. Press t.
2. Dial the number.
3. Press e to hang up or put the
handset on the base.
display key
will
11

Putting a call on hold

The hold feature keeps your caller
on the line so you can talk privately
to someone in the room. If you
forget that someone is on hold, the
Mæstro 4625 releases the line after
five minutes.
To put a call on hold
1. Make or answer a call.
2. Press h.
3. To take the call off hold,
press t.
Using display keys to
access features
Display keys are the two keys
below the display on the handset.
The function of these keys is
written above them in the display,
and will depend on what feature
you are using.
When a command (such as
) appears on the display,
press the display key below to
activate that command.
or