Switching The Input; Using The Status Function; Using The Automatic Setup Function - Panasonic PT-DW640EL Operating Instructions Manual

Switching the input

The input for projection can be switched.
1)
Press the input selection (<RGB1>, <RGB2>,
<DVI-D>, <VIDEO>, <S-VIDEO>, and <HDMI>)
buttons.
f This operation can be also performed by pressing the input
selection (<RGB1>, <RGB2>, <DVI-D>, <VIDEO>, <S-VIDEO>,
and <HDMI>) buttons on the control panel.
r Switching the input items
<RGB1>
<RGB2>
<DVI-D>
<VIDEO>
<S-VIDEO>
<HDMI>

Using the status function

You can display the status of the projector.
button
1)
Press the <STATUS> button.
f The [STATUS] screen is displayed.
Note
f This can also be displayed from the [PROJECTOR SETUP] menu → [STATUS] ( x page 81).

Using the automatic setup function

The automatic setup function can be used to automatically adjust the resolution, clock phase, and picture position when analog RGB signals
consisting of bitmap images such as computer signals are being input, or to automatically adjust the picture position when DVI-D/HDMI signals
are input. Supplying images with bright white borders at the edges and high-contrast black and white characters is recommended when the
system is in automatic adjustment mode.
Avoid supplying images that include halftones or gradation, such as photographs and computer graphics.
button
48 - ENGLISH
Chapter 3 Basic Operation — Remote control operation
button
Switches to RGB1 input.
Switches to RGB2 input.
Switches to DVI-D input.
Switches to VIDEO input.
Switches to S-VIDEO input.
Switches to HDMI input.