Setting Up; Projection Method; Parts For Ceiling Mount (Optional) - Panasonic PT-DW640EL Operating Instructions Manual

Setting up

Projection method

You can use the projector with any of the following four projection methods. Select the appropriate method depending on the environment.
Mounting on the ceiling and projecting forward
Menu item *
[PROJECTION METHOD]
[COOLING CONDITION]
Mounting on the ceiling and projecting from rear
(Using the translucent screen)
Menu item
*
[PROJECTION METHOD]
[COOLING CONDITION]
* For menu item details, refer to the [PROJECTOR SETUP] menu → [PROJECTION METHOD] ( x page 75) and [COOLING CONDITION]
( x page 76).

Parts for ceiling mount (optional)

You can install the projector on the ceiling using the optional ceiling mount bracket (ET-PKD56H: for high ceilings, or ET-PKD55S: for low
ceilings).
f Use only the ceiling mount brackets specified for this projector.
f Refer to the installation manual for the ceiling mount bracket when installing the bracket and the projector.
Attention
f To ensure projector performance and security, installation of the ceiling mount bracket must be carried out by your dealer or a qualified
technician.
26 - ENGLISH
Chapter 2 Getting Started — Setting up
Setting on a desk/floor and projecting from rear
(Using the translucent screen)
Method
[FRONT/CEILING]
[CEILING SETTING]
Setting on a desk/floor and projecting forward
Method
[REAR/CEILING]
[CEILING SETTING]
Menu item *
[PROJECTION METHOD]
[COOLING CONDITION]
Menu item
*
[PROJECTION METHOD]
[COOLING CONDITION]
Method
[REAR/FLOOR]
[FLOOR SETTING]
Method
[FRONT/FLOOR]
[FLOOR SETTING]