Table of Contents
Advertisement
[SYSTEM SELECTOR]
The projector will automatically detect the input signal, but you can set the system method manually when an unstable signal is input. Set the
system method matching the input signal.
1)
Press as to select [SYSTEM SELECTOR].
2)
Press the <ENTER> button.
r Available system formats
Terminals
<VIDEO IN> terminal,
<S-VIDEO IN> terminal
<RGB 1 IN> terminal,
<RGB 2 IN> terminal
<DVI-D IN> terminal
<HDMI IN> terminal
Note
f Refer to "List of compatible signals" ( x page 125) for compatible signals.
f This may not function properly for some external devices that are connected.
Chapter 4 Settings — [PICTURE] menu
Select [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or [PAL60].
Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL], [PAL-M],
[PAL-N], [SECAM], or [PAL60].)
Switch the setting to the signal method for the TV used. NTSC signal method is used in Japan.
480i, 576i, or 576p signal
VGA60 or 480p signal
Other movie based signals
480p or 576p signal
Other movie based signals
480p or 576p signal
Other movie based signals
3)
Press as to select a system format.
4)
Press the <ENTER> button.
System format
Select [RGB] or [YC
C
].
B
R
Select [VGA60], [480p], or [480pRGB].
Select [RGB] or [YP
P
].
B
R
Select [RGB] or [YC
C
].
B
R
Select [RGB] or [YP
P
].
B
R
Select [AUTO], [RGB], or [YC
B
Select [AUTO], [RGB], or [YP
P
B
C
].
R
].
R
ENGLISH - 59
Hide quick links:
Advertisement
Table of Contents
