Table of Contents
Advertisement
[Basic control] page
Click [Projector control] → [Basic control].
1
[POWER]
Switches the power on/off.
2
[SHUTTER]
Switches between use or not use of the shutter function.
3
[OSD]
Switches between on (display)/off (no display) of the on-screen
display function.
[Detail control] page
Click [Projector control] → [Detail control].
1
Control of the projector
The projector is controlled by clicking the buttons in the same
way as the buttons on the remote control. After the projector is
controlled, the on-screen display of the projector on the right
side of the control page is updated.
2
[LENS]
Adjusts the projection lens.
3
[TEST PATTERN]
Displays the test pattern.
[Network config] page
Click [Detailed set up] → [Network config].
f Click [Network config] to display the [CAUTION!] screen.
f The current settings are displayed by pressing the [Next] button.
98 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
(1)
(2)
(3)
(4)
(5)
(6)
4
[SYSTEM]
Switches the system method.
5
On-screen display of the projector
Displays the same content as the on-screen display of the
projector. The settings of the menu can be checked or changed.
This is displayed even when the on-screen display function is
set to off (hide).
6
[INPUT SELECT]
Switches the input signal.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
4
[GET OSD]
Updates the on-screen display of the projector at the right of the
control page.
5
[SUB MEMORY]
Switches the sub memory.
6
[SYSTEM DAYLIGHT VIEW]
Switches to system daylight view settings.
7
[FREEZE]
Temporarily pauses the image.
8
[SIDE BY SIDE] (only for PT-DW640E)
Displays two different input signals simultaneously.
Hide quick links:
Advertisement
Table of Contents
