[Text Change]; [Menu Lock]; [Menu Lock Password]; [Control Device Setup] - Panasonic PT-DW640EL Operating Instructions Manual

2)
Press qw to switch [DISPLAY SETTING].
f The setting will change among [OFF], [TEXT], and[USER
LOGO] each time you press the button.
r [DISPLAY SETTING]
[OFF]
[TEXT]
[USER LOGO]
Note
f To create the image for [USER LOGO], "Logo Transfer Software" included in the supplied CD-ROM is required.

[TEXT CHANGE]

Change the text displayed when the text display is enabled by selecting [TEXT] in [DISPLAY SETTING].
1)
Press as to select [TEXT CHANGE].
2)
Press the <ENTER> button.
f The [TEXT CHANGE] screen is displayed.

[MENU LOCK]

Display the menu with the <MENU> button, and set whether to enable menu operations.
1)
Press as to select [MENU LOCK].
r [MENU LOCK]
[OFF]
[ON]
Note
f After setting [MENU LOCK] to [ON], if the wrong password is input, the <MENU> button cannot be operated.
f At the time of purchase or after [ALL USER DATA] initialization, [MENU LOCK] is set to [OFF].
f The lock release is maintained until the projector enters standby.

[MENU LOCK PASSWORD]

Change the menu lock password.
1)
Press as to select [MENU LOCK
PASSWORD].
2)
Press the <ENTER> button.
f The [MENU LOCK PASSWORD] screen is displayed.
Attention
f The initial password when used for the first time or after initializing all the user data is "AAAA".
f Change the password periodically that is hard to guess.

[CONTROL DEVICE SETUP]

Enable/disable the button operations on the control panel and the remote control.
1)
Press as to select [CONTROL DEVICE
SETUP].
90 - ENGLISH
Chapter 4 Settings — [SECURITY] menu
The text display is disabled.
The text display is enabled.
The picture registered by the user is projected.
Cancels the lock on menu operations.
Locks menu operations.
3)
Press asqw to select the text, and press the
<ENTER> button to enter the text.
f Maximum 22 characters can be input.
4)
Press asqw to select [OK], and press the
<ENTER> button.
f The text is changed.
2)
Press qw to switch [MENU LOCK].
f The setting will change between [OFF] and [ON] each time you
press the button.
3)
Press asqw to select the text, and press the
<ENTER> button to enter the text.
f Maximum 16 characters can be input.
4)
Press asqw to select [OK] and press the
<ENTER> button.
f To cancel, select [CANCEL].
2)
Press the <ENTER> button.
f The [CONTROL DEVICE SETUP] screen is displayed.