Start-Up Display; Initial Setting (Display Language); Initial Setting (Projector Setup) - Panasonic PT-DW640EL Operating Instructions Manual

Start-up display

The initial setting screen is displayed when the projector is switched on for the first time after purchase as well as when [INITIALIZE] – [ALL
USER DATA] ( x page 84) is executed. Set them in accordance with circumstances.
In other occasions, you can change the settings by menu operations.
Note
f When the projector is used for the first time, you may be required to adjust the focus, zoom, and shift to display the menu screen clearly.
Refer to "Adjusting the focus, zoom, and shift" ( x page 45) for details.

Initial setting (display language)

Select the language to show on the screen. ( x page 67)
1)
Press as to select the display language.

Initial setting (projector setup)

Set each item.
1)
Press as to select an item.
2)
Press qw to switch the setting.
Note
f If you press the <MENU> button in the initial setting (projector setup) screen, you can go back to the initial setting (display language)
screen.
Chapter 1 Preparation — Start-up display
2)
Press the <ENTER> button to proceed to the
initial setting.
f Refer to the following pages for details.
[PROJECTION METHOD] ( x page 75)
[COOLING CONDITION] ( x page 76)
[SCREEN FORMAT] ( x page 69)
[SCREEN POSITION] ( x page 69)
[HIGH ALTITUDE MODE] ( x page 76)
3)
Press the <ENTER> button.
f Confirm the setting value to complete the initial setting.
ENGLISH - 19