[White Gain]; [System Daylight View] - Panasonic PT-DW640EL Operating Instructions Manual

6)
Press the <ENTER> button.
f The [WHITE BALANCE] screen is displayed.
7)
Press as to select [WHITE BALANCE HIGH]
or [WHITE BALANCE LOW].
r Adjustment details
Item
[RED]
[GREEN]
[BLUE]
Note
f Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment
does not look suitable, you can press the <DEFAULT> button on the remote control to return the setting for the selected item only to the
factory default setting.
f The setting of [COLOR TEMPERATURE] is not reflected in internal test patterns ( x page 85). Make sure to set [COLOR TEMPERATURE]
while projecting input signal.
To change the [USER] name
Select the language to show on the screen. ( x page 67)
1)
Press as to select [COLOR TEMPERATURE].
2)
Press qw or the <ENTER> button.
f The [COLOR TEMPERATURE] individual adjustment screen is
displayed.
3)
Press qw to select [USER].
4)
Press the <ENTER> button.
f The [COLOR TEMPERATURE] screen is displayed.
5)
Press as to select [COLOR TEMPERATURE
NAME CHANGE].
Note
f When a name is changed, display of [USER] on the menu is also changed.

[WHITE GAIN]

You can adjust the brightness of white areas of the image.
1)
Press as to select [WHITE GAIN].
r Operations and adjustment range
Operation
Press w .
Press q .

[SYSTEM DAYLIGHT VIEW]

You can correct the image to the optimal vividness even if it is projected under a bright light.
1)
Press as to select [SYSTEM DAYLIGHT
VIEW].
Chapter 4 Settings — [PICTURE] menu
Operation Adjustment
Press w . Deepens red.
Press q . Weakens red.
Press w . Deepens green.
Press q . Weakens green.
Press w . Deepens blue.
Press q . Weakens blue.
Increases the luminance of white.
Image becomes more natural.
8)
Press the <ENTER> button.
f The [WHITE BALANCE HIGH] screen or the [WHITE
BALANCE LOW] screen is displayed.
9)
Press as to select [RED], [GREEN], or [BLUE].
10)
Press qw to adjust the level.
[WHITE BALANCE HIGH]: 0 - +255 (factory default is
[WHITE BALANCE LOW]: 0 - +63 (factory default is +32)
6)
Press the <ENTER> button.
f The [COLOR TEMPERATURE NAME CHANGE] screen is
displayed.
7)
Press asqw to select the text, and press the
<ENTER> button to enter the text.
8)
Press asqw to select [OK], and press the
<ENTER> button.
f The name set to color temperature is changed.
2)
Press qw or the <ENTER> button.
f The [WHITE GAIN] individual adjustment screen is displayed.
3)
Press qw to adjust the level.
Adjustment
Range
+255)
Range
0 - +10
ENGLISH - 57