Denso BHT-604BW User Manual page 95

[7] Setting the resume function
Use the following procedure to set the resume function.
1.
Select "7: RESUME" at the SET SYSTEM menu and then press the
ENT key.
The SET RESUME menu screen displays as shown on the right.
The highlighted setting will be the current setting.
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2]) to change
the setting and press the ENT key.
Press the C key to return to the SET SYSTEM menu.
"1: ON": Enables the resume function.
"2: OFF": Disables the resume function.
The resume function is used to return the BHT status (screen) when the power is turned ON
- Note -
to the status at the point the power was turned OFF.
[8] Defragmenting the drive
Use the following procedure to defragment the drive.
1.
Select "8: DEFRAG" at the SET SYSTEM menu and then press the
ENT key.
The screen displays as shown on the right and the defragmentation process
is performed for the entire user area.
The screen returns to the SYSTEM MENU when defragmentation is
complete.
Defragmentation reorganizes the user area in order to increase the amount
of available space.
If defragmented, the BHT may download files more efficiently than before
performing defragmentation.
Barcode Handy Terminal
81