Denso BHT-604BW User Manual page 136

BHT-604BW
5.
Use the numerical keys to enter an ID and press the ENT key.
Press the SF and the BS key to change the entry mode (numerical entry
alphabet entry).
To delete a single character, press the BS k
P ress the C key to delete all entries made.
6.
U se the cursor keys ([▲] [▼]) or numerical key ([3]) to high
press the ENT key.
The mode changes to entry mode and the cursor display
7.
U se the numerical keys to enter an ID and press the ENT key.
Press the SF and the BS key to change the entry mode (numerical entry (no g
alphabet entry).
To delete a sing
Press the C key to delete all entries made.
8.
Use the cursor keys ([▲] [▼]) or numerical k
press the ENT
The mode changes to entry mode and
9.
Use the numerical keys to enter a pa
P ress the SF and the BS key to change the entry mode (numerical entry (no g
a lphabet entry).
To delete a single character, press the BS key.
Press the C key to delete all entries made.
10.
Use the curs
ROOT CERT] and then press the ENT k
The screen displays as shown on the right.
Use the cursor keys ([▲] [▼]) to select a file name.
A "NO FILE EXISTS" message displays if no f
11.
Use the cursor keys ([▲] [▼]) or numerical key ([6]) to highlight [6:
CLIENT CERT] and then press the ENT key.
The same screen as that for [5: ROOT CERT] displays.
Use the cursor keys ([▲] [▼]) to select a file name.
A "NO FILE EXISTS" message displays if no files exist.
12.
Press the C key to return to the SET RF PARAMETER menu.
122
le character, press the BS key.
key.
the cursor displays.
ssword and press the ENT key.
or keys ([▲] [▼]) or numerical key ([5]) to highlight [5:
ey.
light [3: ANONYMOUS ID] and then
s.
ey ([4]) to highlight [4: PASSWORD] and then
ey.
iles exist.
(no guidance display) and
uidance display) and
uidance display) and