Denso BHT-604BW User Manual page 151

[2] Uploading the BHT system parameter file
1.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight
[2: UPLOAD] and then press the ENT key.
The screen displays as shown on the right indicating that the BHT is
waiting for the system parameter file to be uploaded.
2.
While the upload is in progress, the screen displays as shown on
the right indicating the file name and the number of sent records/the
total number of records.
Press the C key to abort the upload and return to the SYSTEM
PARAMETER menu.
3.
Upon completion of uploading, the BHT displays the screen shown
on the right and beeps once.
Press the C key to return to the SYSTEM PARAMETER menu.
The beeper sounds three times if an error occurs during uploading, and an
error screen displays.
Refer to "Chapter 7 Error Messages" - "7.2 System Mode Errors" and
remedy the error.
Barcode Handy Terminal
137