Denso BHT-604BW User Manual page 134

BHT-604BW
8.
Press the C key to return to the SET RF PARAMETER menu.
It is not possible to read a writte
- Point -
be stored in a safe location. When not setting a WEP key,
the
If an attempt is made to save an incorrect encryption key, and error will
occur, and the screen displays as shown on the right.
Reset with a correct encryption key.
Incorrect Encryption Key Examples

T he encryption key length is incorrect.
 Characters other than hexadecimal notation (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A,
B, C, D, E, F) are used.
Repeat the above procedure to set the requ
for WEP KEY 1 to 4.
Following that, set the transmit key.
9.
Use the cursor keys ([▲] [▼]) or numerical key ([6])
TRANSMIT KEY], and then press the ENT key.
The screen displays as shown on the right.
10 .
Use the cursor keys ([◄] [►]) to highlight the key number to be
used.
Select a key number for which an encryption key has been
- Point -
set.
11 .
Press the ENT key or C key to return to the SET RF PARAMETER
menu.
120
previous setting.
n WEP key, and therefore the WEP ke
ired number of encryption keys
to highlight [6:
y setting must always
the WEP key will be the same as