Denso BHT-604BW User Manual page 140

BHT-604BW
3.
Ensure that [1: PRE SHARED KEY] is highlighted and then press the
The mode changes to entry mode and the cursor displays.
4.
Use the numerical k ys to enter a shared key and p
P ress the SF and the BS key to change the entry mode (numerical entry (no g
al phabet entry).
To delete a single character, press the BS key.
Press the C key to
5.
Press the C key to retur
6.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2:
WPA CIPHER] and then press the ENT key.
T he screen displays as shown on the right.
[1: CIPHER MODE]:
7.
Ensure that [1: CIPHER MODE] is highlighted and then select TKIP
or AES.
Select TKIP to use TKIP.
Select AES to use AES.
8.
Press the ENT key or C key to return to the SET RF PARA
menu.

W ireless Security WPA2-1x Mode
EAP authentication and an encryption system can be used with wireless security W
1.
Select "2: CONFIGURATION" at the SET SECUR
then press the ENT key.
T he screen on the right displays.
[1 : AUTH PARAM (EAP)]:
[2 : WPA CIPHER]:
P ress the C key to return to the SET SECURITY menu.
126
e
delete all entries made.
n to the SET RF PARAMETER menu.
Selects TKIP or AES .
EAP authentication parameter setting
Encryption system setting
ENT key.
ress the ENT key.
METER
PA2-1x mode.
ITY menu and
uidance display) and