Locking Out Channels Or Frequencies - GRE PSR-282 Owner's Manual

Notes:
• Your scanner automatically locks out empty channels.
• You can still manually select locked-out channels
• You can lock out as many as 50 frequencies during a
search. If you try to lock out more, FLo–FULL appears
(see "Reviewing Locked-Out Frequencies" and "Re-
moving Lockouts From All Frequencies").
Reviewing Locked-Out Frequencies
To review the frequencies you locked out, hold down L/
O/L/O RVW for about 2 seconds during a search, then
repeatedly press or
are no locked-out frequencies, or L–r appears and the
scanner displays all locked out frequencies as you press
or . When you reach the highest locked-out fre-
quency, the scanner beeps twice and returns to the low-
est locked-out frequency.
Removing Lockouts From All Fre-
quencies in a One Touch Search Bank
1. Hold down L/O/L/O RVW for about 2 seconds during
a search or while tuning. L–r appears.
Note: If you locked out frequencies which are within the
range of any of the one touch search banks during tune,
the scanner also removes those locked-out frequencies
when you use these steps. For example, if you locked
out 68.000 MHz while tuning, the scanner removes it since
68.000 MHz is one of the frequencies in the search band
1.
2. While holding down TUNE/CLR, press the one-touch
search key where you locked out frequencies.
DEFAULt appears.
3. Press ENT. The scanner clears any lockouts from all
frequencies in a one touch bank. Or, if you do not want
to clear the lockouts, press TUNE/CLR.
Removing Lockouts From All
Frequencies
1. Hold down L/O/L/O RVW for about 2 second during a
search or tune. L–r appears.
2. While holding down TUNE/CLR, press L/O/L/O RVW.
FLo ALL–CL appears.
20
Page 20
. The scanner beeps if there
2003/03/11, 15:46