Table of Contents
Advertisement
3. Press ENT. The scanner clears any lockouts from all
frequencies. Or, if you do not want to clear the lock-
outs, press TUNE/CLR.
Using Priority
The priority feature lets you scan through channels and
still not miss important or interesting calls on a frequency
you select. You can program one frequency into the pri-
ority channel. As the scanner scans, if the priority feature
is turned on, the scanner checks the priority channel for
activity every 2 seconds.
1. Press PGM, then press PRI. PCH and 000.0000 or
the previously-stored frequency appear.
2. Enter the frequency you want to enter into the priority
channel, then press ENT. The display flashes twice.
To turn on the priority feature, press PRI during scanning
or searching. PRI appears. The scanner checks the pri-
ority channel every 2 seconds and stays on the channel
if there is activity. PCH and the frequency appear when-
ever the scanner is set to the priority channel.
To turn off the priority feature, press PRI. PRI disappears.
Using the Display Backlight
You can turn on the display's backlight for easy viewing
in the dark. Press /
onds. To turn off the light sooner, press
Press both PGM and /
light for an extended period of time. To turn it off, press
both PGM and
/
, or press
Turning the Key Tone On and Off
The scanner is preset to sound a tone each time you
press one of its keys (except / ). You can turn the
key tone off or back on.
1. If the scanner is on, turn it off by tuning VOLUME coun-
terclockwise until it clicks.
2. While you hold down 2 and ENT, turn on the scanner.
3. When oFF tonE or on tonE appear, release 2 and ENT.
Page 21
to turn on the light for 5 sec-
/
again.
to turn on the display's back-
/
.
2003/03/11, 15:46
21
Hide quick links:
Advertisement
Table of Contents
