GRE PSR-282 Owner's Manual page 11

or —Indicates the search or scan direction.
CH—Appears with digits (1-200) or P to show which chan-
nel the scanner is turned to.
SRCH—Appears during searches.
MAN—Appears when you manually select a channel.
B—Appears when the batteries are low.
L/O (lockout)—Appears when you manually select a
channel that was previously locked out during scanning
or when you review a locked-out frequency.
SCAN—Appears when the scanner scans channels.
PGM—Appears when you program frequencies into the
scanner's channels.
PRI—Appears when the priority feature is turned on.
DLY—Appears when you program a 2-second delay.
Ch–FULL—Appears when you try to enter a frequency
during a search when all channels are full.
–dUPL– —Appears when you try to store a frequency
that is already stored in another channel.
DEFAULt—Appears when you remove all the lock-outs
from the each search bands frequencies.
Error—Appears when you make an entry error.
FLo ALL–CL—Appears when you remove all the locked-
out frequencies during a search.
FLo–FULL—Appears when you try to lock out a frequency
during a tune when 50 frequencies are already locked
out.
F L–out—Appears when you start a tune from a locked-
out frequency.
L–r—Appears when you review locked-out frequencies.
oFF tonE—Appears when you turn the key tone off.
on tonE—Appears when you turn the key tone on.
P—Appears when the scanner is tuned to the priority
channel.
–t– —Appears when the scanner is turning frequencies.
11
Page 11 2003/03/11, 15:46