Understanding Banks - GRE PSR-282 Owner's Manual

UNDERSTANDING BANKS

Channel Storage Banks
A bank is a storage area for a group of channels. Chan-
nels are storage areas for frequencies. Whereas a chan-
nel can only contain one frequency, a bank can hold nu-
merous channels.
To make it easier to identify and select the channels you
want to listen to, your scanner divides the channels into
10 banks (1 to 10) of 20 channels each, a total of 200
channels. You can use each channel-storage bank to
group frequencies.
One Touch Banks
The scanner is preprogrammed with the frequencies. This
is handy for quickly finding active frequencies instead of
searching through an entire bank (see "Searching the
One Touch Banks" on Page 12).
Note: The frequencies in the scanner's one touch banks
are preset. You cannot change them.
BAND Sub-Bank
BAND 1 Bank 1
Bank 2
BAND 2 ----------
BAND 3 Bank 1
Bank 2
BAND 4 Bank 1
Bank 2
Bank 3
Bank 4
Bank 5
HAM Bank 1
Bank 2
12
Page 12
Frequency Range
66–77.995 MHz
78–88 MHz
118–137 MHz
137–144 MHz
146–174 MHz
380–405.9875 MHz
406–429.9875 MHz
440.0125–449.9875 MHz
450–469.9875 MHz
470–512 MHz
144–146 MHz
430–440 MHz
2003/03/11, 15:46