Table of Contents
Advertisement
Troubleshooting
All XP9500 lightbars are thoroughly tested prior to shipment. However, should you encounter a
problem during installation or during the life of the product, follow the guide below for information
on repair and troubleshooting. Additional information may be obtained from the factory technical
help line at 314-996-2800.
Note: LED modules must be replaced as a module. There are no user serviceable parts.
PROBLEM
QUESTIONS
LED directional
module not
operating when
N/A
powered.
Lamp or LED
Are the
controller
module does not
panel LED
come on when it
indicators
should (based on
functioning
controller function)
properly?
Yes
No
LED MODULE
TROUBLESHOOTING GUIDE
POSSIBLE CAUSE
a. Bad power/ground
connection.
b. Defective module.
a. Bad lamp or defective
LED module
b. Defective wiring
connection
a. Control box is damaged
7
SOLUTION
a. Fix connection.
b. Replace module.
a. Replace lamp or LED module
b. Repair connection
a. Return to Code 3
Advertisement
Table of Contents
Need help?
Do you have a question about the XP9500 and is the answer not in the manual?
Questions and answers