System Information Display Function; Sntp Setting Function - Soundwin VoIP Voice Gateway User Manual

4.6.5 System Information Display Function

Click System Information Display to open the Online Status page. In the example, on the
following page, both PPPoE connection is up on the WAN interface, H323 Status, MAC
address, Register Status, etc....

4.6.6 SNTP Setting Function

Click SNTP Setting to open the Online Status page. In the example, on the following page,
.
Use SNTP Setting—When checked, Gateway uses a Simple Network Time Protocol (SNTP) to
set the date and time . The Gateway synchronizes the Gateway's time after you select the time
zone. Use SNTP Setting, Select the time zone which Gateway was at.
73