Soundwin VoIP Voice Gateway User Manual page 45

H.323 Parameters Label
H.323 ID
Primary Gatekeeper
IP Address
Secondary Gatekeeper
IP Address
Primary Gatekeeper
Domain Name
Secondary Gatekeeper
Domain Name
H.323 Gatekeeper ID
Voice Cap Prefix
RAS Port Adjustment
Q.931 Port Adjustment
H.323 Call Pass through NAT
H.323 Pass Through
NAT method
Sets the unique name of this Gateway, that is communicated as part of
H.323 messaging..
There are two gatekeeper address fields, one is primary, the other
secondary. If this gateway does not want to register to any gatekeeper,
just set value 0 to the primary gatekeeper address. If the primary
gatekeeper address is not 0, the gateway will register to the primary
gatekeeper. If the second gatekeeper is not 0, the gateway will try to
register to the second gatekeeper when failed to register to primary
gatekeeper, i.e. if both the primary gatekeeper and second gatekeeper
addresses are present, the gateway will try to register to these two
gatekeepers respectively. The gateway can have the gatekeeper backup
function by this way.
Let user use Domain Name of H.323 Gatekeeper.
The Gatekeeper ID; usually do not need to set this field unless the
gatekeeper must need this value.
Let user set prefix number in RRQ nonstandard voice cap entry.
In H.323 standard the RAS default port number is 1719. The VoIP
gateway provides user to change RAS port number to meet the network
environment.(Some area carrier blocks or forbidden the default port
number)
In H.323 standard the default Q.931 port number is 1720. The VoIP
gateway provides user to change Q.931 port to meet the network
environment. (Some area carrier blocks or forbidden the default port
number)
1. Disable : The Gateway operates in public IP address
2. Auto Detection: When the Gateway register to GNU Gatekeeper /
H.323 Gatekeeper (SK Series), please select this option.
3. Manual Setting: When the Gateway registers to H.323 Gatekeeper
and operate under NAT (enable DMZ), please select this option and key
in IP address.
45