Soundwin VoIP Voice Gateway User Manual page 100

For Gateway_1 Setting
1. Choose "Dialing plan" and Setting Outgoing Dial plan.
2. Setting dial plan just like picture for demo."20x" the "x" mean wild card , it can be one
of "0~9" number. And length "3~3", when you input 3 number and the call will be made.
Destination is the Gateway_2 IP address.
For Gateway_2 Setting
1. choose "Dialing plan" and Setting Outgoing Dial plan.
2. Setting dial plan just like picture for demo."10x" the "x" mean wild card , it can be one
of "0~9" number. And length "3~3", when you input 3 number and the call will be made.
Destination is the Gateway_1 IP address.
Step_3:make call each other
1.When you setting 2 gateway done, you can make call by each other. On gateway_1, just
call "200",and the gateway_2 Port_1 will ringing, then be made a call. And gateway_2 call
"100" , the gateway_1 will ringing, then be made a call.
100