Advanced Setting Label - Soundwin VoIP Voice Gateway User Manual

Advanced Setting Label

Network Setup Label
WAN Setting
LAN Setting
Virtual Server
Dynamic DNS
Network Parameters
VoIP Setup
VoIP Basic
Dialing Plan
Advanced Setting
Hot Line Setting
Port Status
Traffic Monitor
System Administration:
Sets/changes the WAN port Type like "Fixed IP", "DHCP Client"
or "PPPoE".
Modifies the IP address of the LAN port and setting DHCP Server
parameters.
Remote user can access server such as Web or FTP at you local site
via public IP address can be automatically redirected to local servers
configured with private IP address.
Dynamitic DNS allows you to provide Internet users with a domain
name to access your server.
Network Parameter allows you to modify the access port of gateway.
For example :
Setting HTTP port : 8080
Setting TELNET port is : 8081
(Default HTTP :80, TELNET: 23)
The S Series Gateway support 2 / 4 / 8 / 16 / 24 phone/line for SIP
and H.323 VoIP call applications. You can configure these ports from
this menu.
Users could apply any dial policy by setting Dial Plan including
outgoing dial plan and incoming dial plan.
VoIP Gateway support for silence compression, DTMF Relay, Codec
Selection, FAX mode Option,
H323 Register Type and H.323 Fast-Start/Normal-Start function.
FXO AC impedance, Volume Adjustment, RRQ TTL, RFC2833
Payload, IP TOS,..etc
Let user can set up "hotline" to dial the phone number automatically.
Display the telephone interface status
Display and Monitor the voice traffic and data traffic.
37