Network Configuration - Soundwin VoIP Voice Gateway User Manual

Management Label
You can save configuration and restart the gateway with the default
Save Configuration
configuration or with the current running configuration.
Access Control Users can Sets/changes the administrator password..
Set to Default You can restart the gateway with the default configuration.
Backup/Restore User can backup the configuration file of Gateway to PC or Restore the
Configuration configuration file from PC.
Display Software version, WAN Type, VoIP Status, VoIP Codec, Phone
System Information
Interface and System Tim.
SNTP (Simple Network Time Protocol) Configuration for synchronizing
SNTP Setting
gateway clocks in the global Internet.
Syslog Setting Gateway can sends log information to Syslog Server by UDP ports 514.
The gateway supports packets capture and save the packets to your PC.
Capture Packets User can use Network Protocol Analyzer "Ethereal" to analysis the
packets. (Free down load from http://www.ethereal.com/)

4.1 Network Configuration

4.1.1 WAN Port Type Setup
For most users,Internet access is the primary application. The S Series Gateway support the
WAN interface for Internet access and remote access. The following sections will explain more
details of WAN Port Internet access and broadband access setup. When you click "WAN Setting",
the following setup page will be show. Three methods are available for Internet Access.
Static IP
PPPoE
DHCP
38