GE Profile PFDS450 Owner's Manual & Installation Instructions page 39

REVERSING THE DOOR SWING (if desired)
REINSTALL DOOR ASSEMBLY
7
Place the door back on the dryer front panel, making
sure the latch is engaged and the hinge is sitting in
the two openings in the dryer front. Assemble the
door to the front cabinet, using 2 screws (#10 x 0.75"
tapping screws).
Install the new left-hand hinge cap (from the
reversibility kit) onto the hinge, by opening the
dryer door and screwing the hinge cap into place.
NOTE: Save the remaining caps and covers in
case you want to reverse the hinge again.
Hinge cap
Downloaded from www.Manualslib.com
Installation Instructions
Install 2 x B
screws
1 x C Screw
in hinge cap
manuals search engine
39