Setting Device Discovery Parameters - Enterasys Netsight User Manual

3. In the Description: field, enter a description of the Discover script. This
4. Enter any additional information you wish to store about the script in the
5. Define your remaining Discover script parameters as explained in the

Setting Device Discovery Parameters

A Device Discover script can discover devices within a single IP address range or a series
of ranges. It can also search one or more subnets, and limit its discoveries to SNMP
devices only or Cabletron devices only. You define Device Discovery parameters using
the Device page of the Discover Properties window
the Device tab.
Figure 3-4. The Device Page of the Discover Properties Window
Creating and Modifying Discover Scripts
description opens with the script's name in the Discover Manager window,
and may help you to select from among the available scripts.
Notes: field. Note that this information is not displayed anywhere else.
following sections, or click OK to save your entries and return to the Discover
Manager window.
Discovering Nodes
(Figure 3-4), accessed by clicking on
3-5