Enterasys Netsight User Manual page 172

Creating Network Maps
3. In the Address field, enter the IP address assigned to the device you wish to
4. In the Community Name field, enter a community name that will provide at
6-24
Figure 6-16. Displaying the Map Menu
The Insert Device window,
Figure 6-17. The Insert Device Window
add.
least Read access to the device you are adding. For full management access,
use a community name that will provide superuser access.
Note that the contents of the Map
menu will change depending upon
whether you accessed it from a
blank map area or from a node icon.
Figure 6-17, opens.
Adding Network Elements to your Map