Setting General Discover Properties - Enterasys Netsight User Manual

Discovering Nodes
Using the Discover Properties window, you can name your script, enter an IP range for an
IP Discovery process, and assign a community name. You can also define and select entire
subnets for a Subnet Discovery, select a Script Filter for a discovery, and define the time
interval at which your discovery will take place.

Setting General Discover Properties

The General page of the Discover Properties window is used to name and describe your
Discover script (as shown in
in the Discover Manager window.
To name and describe your Discover script:
1. If necessary, click on General tab in the Discover Properties window. The
2. Highlight the contents of the Name: field, and type the name of your Discover
Figure 3-3. The General Page of the Discover Properties Window
3-4
General page (Figure
script. By default, each new script is named New Discover X, where X
increments as necessary to create a unique name.
Figure 3-3). The script's name and description will be listed
3-3) opens.
Creating and Modifying Discover Scripts