Enterasys Netsight User Manual page 180

Creating Network Maps
7. Click OK to save your new symbol definition.
If you have changed the symbol label or image, the new properties will be displayed in the
Select Symbol window.
Creating a New Symbol
If you can't find an existing symbol that meets your needs, and you are reluctant to edit the
existing symbol database, you can create your own new symbol, as follows:
1. If necessary, open or activate a map window. (Remember, none of the Draw
2. Click the Symbol icon
3. Click the New
4. To assign a label for your new symbol, click in the Label field, and enter the
6-32
selection. The image portion you have selected will be displayed below
the Large Image radio button. Move the cursor and click again to change
this selection until you find the one you want.
toolbar options will be available unless at least one map is open and active.)
or
Select Insert—>Symbol from the primary window menu bar.
The Select Symbol window,
button, or right-click on any existing symbol, and select
New from the resulting menu. The New Symbol window,
(Note that this window is virtually identical to the symbol Properties window
described in the previous section.)
Figure 6-25. New Symbol Window
desired text.
from the toolbar.
Figure 6-23 (page 6-30), opens.
Figure 6-25, opens.
Customizing Your Map