Enterasys Netsight User Manual page 167

3. To create an entirely new map, click Create New. The New Map View
4. If you have chosen to create a new map, closing the New Map View
You can only place a GoTo symbol in the root map that was active when the Insert GoTo
process was initiated.
TIP
Be sure to save the map to which you have added the GoTo symbol; see
page
Building Your Network Map
window (as illustrated in
and display parameters as desired, then click OK.
To link an existing map, select the name of the map you wish to link, then
click OK. Only the maps available for GoTo linkage will be listed.
window changes the arrow cursor to a crosshair cursor; click this cursor in
your root map to place the submap icon.
If you have selected an existing map, it will be opened and placed behind
the active map, and the arrow cursor will change to a crosshair cursor. Click
this cursor in your root map to place the GoTo icon.
6-62, for more information.
Figure 6-4 on page 6-8) opens. Configure the name
Creating Network Maps
Saving Maps,
6-19