Device Properties - Enterasys Netsight User Manual

Device Properties

The Device Properties tabbed page
properties:
Label
Address
Community Name
Interfaces
The Interfaces tabbed page
device (i.e., the first interface detected by NetSight Element Manager when the device is
discovered or inserted), and both displays and allows you to set its polling parameters.
You can also edit certain display properties for that interface.
Adding Network Elements to the Node Database
(Figure
Figure 4-22. Device Properties Page
The value set in this field will be displayed in the Label column
in any list view which contains this field. Note that this is not
the label that will be assigned to a device icon displayed in a
Map View. There is no default value.
The IP address assigned to the device. This field is not editable.
The community name used to contact the device. This will
default to the community name used by the discover script or
the community name entered in the Add Device window; you
can edit this field if necessary to change your level of access to
the device.
(Figure 4-23) displays the contact interface on the selected
4-22) allows you to edit the following
List Views
4-31