Plus/Minus Weighing - KERN EOB Operating Instructions Manual

Plus/minus
weighing
EOB/EOE_L/EOE_XL/EOS-BA-e-1030
For example for item weight check, production check etc.
switch-on the balance using ON/OFF button and wait for
zero display.
Put the nominal weight on the weighing plate and tare to
zero using TARE key. Remove the nominal weight.
Put the test objects subsequently on the weighing plate, the
respective deviation from the nominal weight is displayed
with the respective sign to „+" and „-" (e.g. + 0.037 g).
According to the same procedure also packages with the
same weight can be produced, referring to a nominal
weight.
Back to weighing mode by pressing the TARE button.
21